E-mail: info@adv-ti.net
Tel: +86-0755-23710011
Contact Us


Add: 3F, Unit B, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen, China

Con: Sunny

Tel: 86-0755-23710011

E-mail: sunny@adv-ti.net

Web: www.advanced-titanium.com

Home > News > Content


Monel Valves Introduction
Jun 13, 2016

Monel alloy valve known as a nickel is a nickel-base alloy valves add copper, iron, manganese and other elements made of alloys

The valves. Good corrosion resistance monel alloy valve, exterior surfaces silver, suitable for the material. Monel valves in fluorine gas, hydrochloric acid, sulfuric acid,

Environment with excellent corrosion-resistant properties of hydrofluoric acid. Monel (M400) valve in the sulfuric acid concentration is less than 85% is corrosion-resistant

。 Monel (M400) is one of the few important hydrofluoric acid-resistant materials. M400 alloy valve

In most water corrosive environments, not only excellent in resistance to corrosion and pitting, stress corrosion, etc is also very good. The corrosion rate is less than

0.025mm/a high temperature corrosion: monel valves in the air continue to work the maximum temperature in about 600 ¡æ, high temperature steam

, The corrosion rate of less than 0.026mm/a. Ammonia: due to the high content of nickel-monel alloy 400 valves, so they can be resistant to 585 c anhydrous ammonia was found to

The corrosion. Monel alloy valve has a tough, corrosion-resistant properties, is widely used in the chemical and other industries.