E-mail: info@adv-ti.net
Tel: +86-0755-23710011
Contact Us


HONG KONG ADVANCED TITANIUM GROUP LIMITED

Add: 3F, Unit B, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen, China

Con: Sunny

Tel: 86-0755-23710011

E-mail: sunny@adv-ti.net

Web: www.advanced-titanium.com

Home > News > Content

News

Titanium Ball Valves
Jun 13, 2016

Titanium ball valves are manufactured from titanium metal seal for spherical valve of special material, titanium ball valves and common difference is its use of ball valves materials resistance to corrosion and oxidation resistance ability is very strong, so the valve can be manufactured with special materials such promote corrosion and oxidation resistance ability, adapt to work under complex conditions, longer runs.

Features of titanium ball valve rotates 90 degrees, closed seal as a hollow sphere, sealing material for titanium uses rotating sphere seal to achieve switch roles, within the range of 90-degree rotation range can be adjusted freely, titanium ball valves in the pipeline used to be cut off, distribution and change the direction of the flow medium, can be as simple as adjusting the flow of the action. Future development trend of titanium ball valve are both throttle and control flow functions of super-strong titanium valve

Not all places are using TI titanium ball valve material, requires the use of titanium material parts are:

Valve body and bonnet: TA1, TA2, TA10, Gr2, Gr3, valve flap: TA1, TA2, TA10, Gr2, Gr3

Stem: TA1, TA2, TA10, TC4, Gr2, Gr3, Gr5

The density of titanium to 4.506-4.516 g/cm³ (20 ℃), aluminum and lower than that of iron, copper, and nickel.  But strength among the metal head of the strength and light weight. Room temperature titanium combines with oxygen to produce a dense very thin oxide films, this film does not react with most strong acids, strong alkali at room temperature, including King of acid-and aqua regia.  It only with hydrofluoric acid, hot concentrated hydrochloric acid, concentrated sulfuric acid reacts, it reflects the corrosion resistance of titanium. Melting point of 1668 ± 4, latent heat of melting 3.7-5.0 kcal/gram Atom, boiling point 3260 ± 20 degrees, the latent heat of vaporization 102.5-112.5 kcal/gram Atom, 4,350 c critical temperature, critical pressure of 130 ATM. Low thermal conductivity and electrical conductivity of titanium, similar to or slightly lower than the stainless steel, and titanium with superconductivity.

Corrosion and oxidation resistance of titanium ball valves are suitable for all media. Such a working environment for chemical, oil, gas, paper and other chemical industries!